{"title":"Firearms \u0026 Blasters","description":"\u003cp\u003eReplica military firearms and sci-fi blasters.\u003c\/p\u003e","products":[{"product_id":"resident-evil-9-requiem-hatchet","title":"Resident Evil 9 Requiem \u0026 Hatchet","description":"\u003cp\u003eComplete your Leon (or Grace!) cosplay with his signature hatchet and eponymous Requiem from the critically-acclaimed Capcom horror shooter, Resident Evil Requiem!\u003c\/p\u003e\n\u003cp\u003eThe Requiem is approximately 16 in\/41 cm long and the hatchet is approximately 18 in\/46 cm long when fully assembled. Comes with 5 bullets.\u003c\/p\u003e\n\u003cp\u003eBoth props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eSanded and primed kits come assembled, sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. There may be slightly red residue leftover from the spot putty filler, but that is a normal part of the smoothing process to hide the plastic layer lines on the surface. The prop is assembled largely with CA glue, reinforced with epoxy or E6000 to ensure that the bonds remain unbreakable even with rough handling.\u003c\/p\u003e\n\u003cp\u003eThe finished set come fully assembled and are as close to 1:1 scale as possible to ensure accuracy to the source material. The orange tip in the photo is NOT included in the final product, but may be included upon request.\u003c\/p\u003e\n\u003cp\u003eSTL file provided by Galactic Armory. Printed and finished under their Patreon's Specialist Tier.\u003cbr\u003e\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit Requiem","offer_id":55375383691555,"sku":"PRE9RH-1","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Raw DIY Kit Hatchet","offer_id":55375383724323,"sku":"PRE9RH-2","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Raw DIY Kit Requiem + Hatchet Set","offer_id":55375383757091,"sku":"PRE9RH-3","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed Requiem","offer_id":55375383789859,"sku":"PRE9RH-4","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed Hatchet","offer_id":55375383822627,"sku":"PRE9RH-5","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed Requiem + Hatchet Set","offer_id":55375383855395,"sku":"PRE9RH-6","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Finished Requiem","offer_id":55375383888163,"sku":"PRE9RH-7","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Finished Hatchet","offer_id":55375383920931,"sku":"PRE9RH-8","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Finished Requiem + Hatchet","offer_id":55375383953699,"sku":"PRE9RH-9","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9737.jpg?v=1785037738"},{"product_id":"helldivers-2-ar-23-liberator","title":"Helldivers 2 AR-23 Liberator","description":"\u003cp\u003eFor Liberty and Democracy! Complete your dream cosplay with the signature AR-23 Liberator rifle, standard issue to humanity’s greatest fighters.\u003c\/p\u003e\n\u003cp\u003eApproximately 29 in\/74 cm long when fully assembled and includes a detachable magazine. The included scope is for aesthetic purposes only and is nonfunctional.\u003c\/p\u003e\n\u003cp\u003eAll props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eThe sanded and primed kit comes sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. You might find some slightly red residue leftover on the surface from the spot putty filler; that is a normal part of the smoothing process to hide the plastic layer lines to hide the \"3D-printed look\".\u003c\/p\u003e\n\u003cp\u003eTo help keep shipping costs down, the sanded and primed kits are shipped in multiple pieces and require assembly upon arrival. Assembly is easy, with multiple dowels and plugs to help keep the pieces stable before gluing.\u003c\/p\u003e\n\u003cp\u003eFinished props come fully assembled and are as close to 1:1 scale as possible to ensure accuracy to the source material. The optional rifle strap is made out of a sturdy nylon and attached to the rails with hooks. The orange tip in the photos is colored aluminum silver in the final product, and a orange variation can be included free-of-charge upon request.\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit","offer_id":55375388377379,"sku":"PHD2L-1","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed","offer_id":55375388410147,"sku":"PHD2L-2","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted","offer_id":55375388442915,"sku":"PHD2L-3","price":225.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted + Strap","offer_id":55375388475683,"sku":"PHD2L-4","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9759.jpg?v=1785038244"},{"product_id":"bolt-pistol-prop","title":"Bolt Pistol Prop","description":"\u003cp\u003eThe perfect companion sidearm to the Bolt Rifle is the Bolt Pistol, inspired by a certain grimdark universe of the far future.\u003c\/p\u003e\n\u003cp\u003eApproximately 12 in\/30 cm long when fully assembled.\u003c\/p\u003e\n\u003cp\u003eAll props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eSanded and primed kits come assembled, sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. There may be slightly red residue leftover from the spot putty filler, which is a normal part of the smoothing process to hide the plastic layer lines on the surface. The prop is assembled largely with CA glue, reinforced with epoxy or E6000 to ensure that the bonds remain unbreakable even with rough handling.\u003c\/p\u003e\n\u003cp\u003eFinished props are as close to 1:1 scale as possible to ensure accuracy to the source material. The magazine can be removed via a pair of neodymium magnets. The orange barrel in the photos is colored the same dark gunmetal color as the rest of the bolter in the final product. An orange barrel may be included free-of-charge upon request.\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit","offer_id":55375390114083,"sku":"PWHBP-1","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed","offer_id":55375390146851,"sku":"PWHBP-2","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted","offer_id":55375390179619,"sku":"PWHBP-3","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9746.jpg?v=1785038593"},{"product_id":"helldivers-2-ar-61-tenderizer","title":"Helldivers 2 AR-61 Tenderizer","description":"\u003cp\u003eRound out your arsenal with the AR-61 Tenderizer assault rifle, perfect for dispensing liberty and justice across the galaxy!\u003c\/p\u003e\n\u003cp\u003eApproximately 31 in\/79 cm long when fully assembled. The magazine is removable via a trigger release system. The included scope is nonfunctional and only serves aesthetic purposes.\u003c\/p\u003e\n\u003cp\u003eAll props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eThe sanded and primed kit comes sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. There may be slightly red residue leftover from the spot putty filler, but worry not! That is a normal part of the smoothing process to hide the plastic layer lines on the surface.\u003c\/p\u003e\n\u003cp\u003eTo help keep shipping costs down, the sanded and primed kit is shipped in multiple pieces and require assembly upon arrival. Assembly is easy, with multiple dowels and plugs to help keep the pieces stable before gluing.\u003c\/p\u003e\n\u003cp\u003eFinished props come fully assembled and are as close to 1:1 scale as possible to ensure accuracy to the source material. The orange tip in the photos is colored aluminum silver in the final product, and a orange variation can be included free-of-charge upon request.\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit","offer_id":55375392375075,"sku":"PHD2T-1","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed","offer_id":55375392407843,"sku":"PHD2T-2","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted","offer_id":55375392440611,"sku":"PHD2T-3","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9762.jpg?v=1785038864"},{"product_id":"helldivers-2-p-4-senator","title":"Helldivers 2 P-4 Senator","description":"\u003cp\u003eContinue the fight for Freedom and Liberty with the double-action P-4 Senator revolver!\u003c\/p\u003e\n\u003cp\u003eApproximately 15 in\/38 cm long when fully assembled. Comes with 6 replica brass bullets.\u003c\/p\u003e\n\u003cp\u003eAll props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eThe sanded and primed kit comes assembled, sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. There may be slightly red residue leftover from the spot putty filler, but worry not! That is a normal part of the smoothing process to hide the plastic layer lines on the surface. The prop is assembled largely with CA glue, reinforced with epoxy or E6000 to ensure that the bonds remain unbreakable even with rough handling.\u003c\/p\u003e\n\u003cp\u003eFinished props are as close to 1:1 scale as possible to ensure accuracy to the source material. Orange tips for law \u0026amp; safety reasons are NOT included in the final product, but may be included upon request.\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit","offer_id":55375404204323,"sku":"PHD2S-1","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed","offer_id":55375404237091,"sku":"PHD2S-2","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted","offer_id":55375404269859,"sku":"PHD2S-3","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9744.jpg?v=1785039079"},{"product_id":"zenless-zone-zero-billy-kid-revolver","title":"Zenless Zone Zero Billy Kid Revolver","description":"\u003cp\u003eStarlight, it's time to shine! Equip yourself with Billy Kid's custom twin revolvers, also known as \"The Girls\", and take your Zenless Zone Zero cosplay to new heights!\u003c\/p\u003e\n\u003cp\u003eApproximately 21 in\/53 cm long when fully assembled, with functional, spinning spokes! The bullet chamber itself is non-functional.\u003c\/p\u003e\n\u003cp\u003eAll props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eSanded and primed kits come assembled, sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. There may be slightly red residue leftover from the spot putty filler, but that is a normal part of the smoothing process to hide the plastic layer lines on the surface. The prop is assembled largely with CA glue, reinforced with epoxy or E6000 to ensure that the bonds remain unbreakable even with rough handling.\u003c\/p\u003e\n\u003cp\u003eFinished props are as close to 1:1 scale as possible to ensure accuracy to the source material. Orange tips for law \u0026amp; safety reasons are NOT included in the final product, but may be included upon request.\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit","offer_id":55375397912867,"sku":"ZZZBKR-1","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed","offer_id":55375397945635,"sku":"ZZZBKR-2","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted","offer_id":55375397978403,"sku":"ZZZBKR-3","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9731.jpg?v=1785039258"},{"product_id":"helldivers-2-br-14-abjudicator","title":"Helldivers 2 BR-14 Abjudicator","description":"\u003cp\u003eComplete your Helldivers cosplay with the BR-14 Abjudicator assault rifle, first seen in the Democratic Detonation Warbond!\u003c\/p\u003e\n\u003cp\u003eApproximately 40 in\/101 cm long when fully assembled, and features a detachable magazine. The bullets are not removable from the magazine.\u003c\/p\u003e\n\u003cp\u003eAll props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eThe sanded and primed kit comes assembled, sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. There may be slightly red residue leftover from the spot putty filler. That is a normal part of the smoothing process to hide the plastic layer lines on the surface.\u003c\/p\u003e\n\u003cp\u003eTo help keep shipping costs down, the sanded and primed kits are shipped in multiple pieces and require assembly upon arrival. Assembly is easy, with multiple dowels and plugs to help keep the pieces stable before gluing.\u003c\/p\u003e\n\u003cp\u003eThe fully painted Abjudicator comes fully assembled with CA glue reinforced with epoxy to ensure that the bond remains unbreakable even with rough handling. The red decal included in the photo does NOT come free-of-charge, and any decals must be requested in the customization options. Orange tips for law \u0026amp; safety reasons may be included upon request.\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit","offer_id":55375399223587,"sku":"PHD2ABJ-1","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed","offer_id":55375399256355,"sku":"PHD2ABJ-2","price":225.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted","offer_id":55375399289123,"sku":"PHD2ABJ-3","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9707_da6ddb27-518a-4d6a-9741-7f9101a83380.jpg?v=1785040093"},{"product_id":"e-11-medium-blaster","title":"E-11 Medium Blaster","description":"\u003cp\u003eBring your next Star Wars cosplay to life with this E-11 medium blaster! Standard-issue for most Imperial Stormtroopers, this jet black blaster has become ubiquitous with the Empire's fearsome armed forces.\u003c\/p\u003e\n\u003cp\u003eApproximately 19 in\/48 cm long when fully assembled.\u003c\/p\u003e\n\u003cp\u003eAll props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eThe raw DIY kit can be shipped for either easy assembly with a non-functional stock (3 pieces) or a more complicated assembly with a functional folding stock (50+ pieces).\u003c\/p\u003e\n\u003cp\u003eThe sanded and primed kit comes assembled, sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. There may be slightly red residue leftover from the spot putty filler, but that is a normal part of the smoothing process to hide the plastic layer lines on the surface. The prop is assembled largely with CA glue, reinforced with epoxy or E6000 to ensure that the bonds remain unbreakable even with rough handling.\u003c\/p\u003e\n\u003cp\u003eFinished props are as close to 1:1 scale as possible to ensure accuracy to the source material. Orange tips for law \u0026amp; safety reasons are NOT included in the final product, but may be included upon request.\u003c\/p\u003e\n\u003cp\u003eSTL file provided by Galactic Armory. Printed and finished under their Patreon's Specialist Tier.\u003cbr\u003e\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit","offer_id":55375400796451,"sku":"PSWE11","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Raw DIY Kit w\/ Foldable Stock","offer_id":55375400829219,"sku":"PSWE12","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed","offer_id":55375400861987,"sku":"PSWE13","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed w\/ Foldable Stock","offer_id":55375400894755,"sku":"PSWE14","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted","offer_id":55375400927523,"sku":"PSWE15","price":125.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted w\/ Foldable Stock","offer_id":55375400960291,"sku":"PSWE16","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9728.jpg?v=1785040342"},{"product_id":"ec-17-hold-out-blaster","title":"EC-17 Hold-Out Blaster","description":"\u003cp\u003eEquip yourself with the classic EC-17 Hold-Out blaster, the perfect companion prop to a Scout Trooper or any Imperial cosplay!\u003c\/p\u003e\n\u003cp\u003eApproximately 8.5 in\/22 cm long when fully assembled.\u003c\/p\u003e\n\u003cp\u003eAll props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eSanded and primed kits come assembled, sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. There may be slightly red residue leftover from the spot putty filler, but worry not! That is a normal part of the smoothing process to hide the plastic layer lines on the surface. The prop is assembled largely with CA glue, reinforced with epoxy or E6000 to ensure that the bonds remain unbreakable even with rough handling.\u003c\/p\u003e\n\u003cp\u003eFinished props are as close to 1:1 scale as possible to ensure accuracy to the source material. Orange tips for law \u0026amp; safety reasons may be included upon request.\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit","offer_id":55375403417891,"sku":"PSWE17","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed","offer_id":55375403450659,"sku":"PSWE18","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted","offer_id":55375403483427,"sku":"PSWE19","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9748.jpg?v=1785040667"},{"product_id":"bolt-rifle-prop","title":"Bolt Rifle Prop","description":"\u003cp\u003eProve your faith to humanity with this Bolt Rifle replica prop, inspired by a certain grimdark universe set in the far future.\u003c\/p\u003e\n\u003cp\u003eApproximately 19 in\/48 cm long when fully assembled.\u003c\/p\u003e\n\u003cp\u003eAll props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eSanded and primed kits come sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. There may be slightly red residue leftover from the spot putty filler, but worry not! That is a normal part of the smoothing process to hide the plastic layer lines on the surface.\u003c\/p\u003e\n\u003cp\u003eTo help keep shipping costs down, the sanded and primed kits are shipped in multiple pieces and require assembly upon arrival. Assembly is easy, with multiple dowels and plugs to help keep the pieces stable before gluing.\u003c\/p\u003e\n\u003cp\u003eFinished props come fully assembled and are as close to 1:1 scale as possible to ensure accuracy to the source material. Orange tips for law \u0026amp; safety reasons may be included upon request.\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit","offer_id":55375407317283,"sku":"PWH40KBR-1","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed","offer_id":55375407350051,"sku":"PWH40KBR-2","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted","offer_id":55375407382819,"sku":"PWH40KBR-3","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9724.jpg?v=1785041279"},{"product_id":"gunslinger-mandalorian-blaster","title":"Gunslinger Mandalorian Blaster","description":"\u003cp\u003eA customized Mandalorian gunslinger pistol, designed to evoke the classic and romantic sensibilities of the wild west, but in Star Wars!\u003c\/p\u003e\n\u003cp\u003eApproximately 14 in\/35.5 cm long when fully assembled. Comes with 6 replica bullets. The assembly features a rotating chamber, a 2mm hole for a metal rod, and a 1\/2\" diameter hole for a wooden dowel as reinforcements. Orange tips for law \u0026amp; safety reasons may be included upon request.\u003c\/p\u003e\n\u003cp\u003eAll props are 3D printed with PLA, designed and painted by cosplayers, for cosplayers!\u003c\/p\u003e\n\u003cp\u003eDIY kits come straight from the printers and as such, may contain minor surface irregularities such as blemishes or layer lines. These prints do not have any preliminary work done and will require you to sand, assemble, and paint yourself. Smaller versions can be sized accordingly upon request. Larger scales, up to 10%, can also be accommodated.\u003c\/p\u003e\n\u003cp\u003eThe sanded and primed kit comes assembled, sanded, filled, and primed, leaving a smooth, polished surface, ready for painting. There may be slightly red residue leftover from the spot putty filler. That is a normal part of the smoothing process to hide the plastic layer lines on the surface. The prop is assembled largely with CA glue, reinforced with epoxy or E6000 to ensure that the bonds remain unbreakable even with rough handling.\u003c\/p\u003e\n\u003cp\u003eFinished props are as close to 1:1 scale as possible to ensure accuracy to the source material. Orange tips for law \u0026amp; safety reasons are NOT included in the final product, but may be included upon request.\u003c\/p\u003e","brand":"DMJHWorkshop","offers":[{"title":"Raw DIY Kit","offer_id":55375410659619,"sku":"PSWGM-1","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Sanded + Primed","offer_id":55375410692387,"sku":"PSWGM-2","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Fully Painted","offer_id":55375410725155,"sku":"PSWGM-3","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/files\/IMG_9741.jpg?v=1785041786"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/3521\/7187\/collections\/IMG_9734.jpg?v=1785040986","url":"https:\/\/dmjhworkshop.com\/collections\/firearms.oembed","provider":"DMJHWorkshop","version":"1.0","type":"link"}